 |
| PSC-I type girder is a PSC-I type girder produced in segment with movable size and weight at factory and assembled on site. It is highly economic and shows an excellent performance and has structural capacity. It is an innovative PSC girder method that enables an accurate joint by using ready made conjugation blocks through match casting and enables production of various length of girder through movement of conjugation block. |
|
|
| |
 |
 |
For the bridge requiring non-standard length of girder |
|
For the bridge on site located in the place in which to secure working place is difficult |
|
For bridges in urban or suburban to be rapidly constructed. |
|
For PSC girder bridge whose quality of concrete is worried |
|
For PSC girder bridge requiring good appearance |
|
|
| |
 |
|
Having high quality and high solidity with compressive solidity of over 100MPa |
|
Making up structural weakness of joint by making various lengths of girders through movement of conjugation block from mould |
|
Shaping high quality of match casting joint sections by conjugating concrete with having the joint interface directs downward. |
|
Reducing the time length of working time on site through factory production |
|
|
